Chronoflo 2
Hydreka
The ChronoFLO transit time flow meter can measure instantaneous flow rates in your flow-carrying pipes. This instrument uses a fully coded signal correlation process to obtain stable measurements even under the most challenging conditions. To cover a wide range of applications in any sector, only one signal processing unit is used. This configuration is supplied with two sensors and a mounting rail that fits a wide range of diameters.
KEY APPLICATIONS
- Diagnosis of drinking water and wastewater networks
- Sectorisation (looking for leaks)
- Checking existing flow meters
- Calibration of lift pumps
- Volume quantification.
| Standalone operation | One month of battery life for one measurement every 5 minutes in standby mode. | |
| Operating temperature | Sensors: -40 to +120 °C (-40 to 248°F)
CPU: -10 to +50°C (14 to 122°F) |
|
| Waterproofing | Sensors: IP68
CPU: IP67 |
|
| Compatible Pipes | Any homogeneous material that conducts sound. | |
| Compatible Internal lining | Bitumen, glass, epoxy paint and concrete coatings. Flexible coatings are not compatible | |
| Dimensions |
1 MHz sensors: 75 x 30 x 45 mm (0.25 x 0.098 x 0.15 ft.)
CPU: 270 x 250 x 125 mm (0.89 x 0.82 x 0.41 ft.) |
|
| Weight | 1 MHz sensors: 0.1 kg each
CPU: 2.5 kg |
|
| Measurement range | Two-way up to 25 m/s (82.02ft/s)
Certified measurement for MEAS value < 20% in the fluid |
|
| Memory | 196,439 data points | |
| Precision | In steady-state flow:
|
|
